|
|
|
|
The insulated consumer units are manufactured from high impact,
flame retardent, ABS material, coloured magnolia. The removeable
transparant hinged cover is manufactured from polycarbonate to
protect the modular devices. The easy to remove cable knockout
entries are on the top, bottom and at the rear of the enclosure.
The range has been designed to comply with BSEN 60439-3.
| |
|
| 
|
|
|
Insulated Consumer Unit Dimensions (mm)
|
|
|
Reference Height Width Depth
|
|
|
DC4 DCR4 205 150 100
DC8 DCR8 DC6SL 205 220 100
DC12 DCR12 DC10SL DC08SL 205 290 100
DC16 DCR16 DC14SL DC12SL 205 360 100
|
|
|
|
The IP55 consumer units are assembled in the UK using
very high quality plastic enclosures. Six sizes enable
any combination between 2 to 32 usable ways.
The two largest enclosures are arranged in two rows.
These are used for split load units of 10+10 and 16+16 ways.
| |
|
| 
|
|
|
IP55 Consumer Unit Dimensions (mm)
|
|
|
Reference Height Width Depth
|
|
|
DC2 DCR2 194 123 105
DC6 DCR6 194 194 105
DC10 DCR10 DC 8SL 259 274 138
DC16 DCR16 DC14SL DC12SL 259 372 138
DC 20SL DC18SL 384 274 138
DC 32SL DC30SL 409 372 138
|
|
|
|
The metal consumer unit range is manufactured from 1mm CR4 cold reduced
mild steel, phosphate pre-treated and powder coated to RAL 7035. Cable
knockouts are provided on the top, bottom and rear faces. The hinged
metal cover is held in the closed position by a magnet. The range has
been designed to comply with BSEN 60439-3.
PPPPPPPPPPPPPP
| |
|
| The height of these units was 186mm. All future stocks will be 214mm high. For a short time both heights will be available.
|
|
| 
|
|
|
Metal Consumer Unit Dimensions (mm)
|
|
|
Reference Height Width Depth
|
|
|
DCM4 DCRM4 214 165 105
DCM8 DCMR8 DCM6SL 214 254 105
DCM12 DCMR12 DCM10SL DCM08SL 214 307 105
DCM16 DCMR16 DCM14SL DCM12SL 214 396 105
DCM22 DCMR22 DCM20SL 214 510 105
|
|
