MCB & CB Accessories
Accessories for DLS6 & DMCB2:
- Auxiliary switch
- Shunt switch
- Locking device for DLS6
MCB selection and application MCBs accessories Technical data
Ordering reference: see below
| DHi - - Auxiliary switch for DLS6 |
Contacts change state when the MCB is switched on or off |
Mounts on the right hand side |
Modules Description Reference |
0.5 1 N/O DHi 3
0.5 1 N/O + 1 N/C DHi 4
0.5 1 N/O + 2 N/C DHi 5
0.5 2 N/O + 1 N/C DHi 6
0.5 1 C/O DHi 7
0.5 2 C/O DHi 8
|
| DHi-S - - Fault signalling for DLS6 |
Contacts change state if the MCB trips due to a fault |
Mounts on the right hand side |
Modules Description Reference |
0.5 1 C/O DHi-S10
0.5 1 N/O + 1 N/C DHiS11
|
| Hi - Auxiliary switch for DMCB2 |
Contacts change state when CB is switched on or off |
Mounts on the right hand side of CB |
Modules Description Reference |
0.5 1 N/O + 1 N/C DMCB2-Hi1 |
| DASA - shunt trip for DLS6 |
Trips the MCB when energised from an external source |
Mounts on the right hand side of the MCB |
Modules Description Reference |
1 Uc AC/DC = 24v DASA-24
1 Uc AC = 230v DASA-230
|
| ASA - shunt trip for DMCB2 |
Trips the CB when energised from an external source |
Mounts on the left hand side of the MCB |
Modules Description Reference |
1 Uc AC = 110-415v ASA-1
Uc DC = 110-230v |
| Locking device for DLS6 |
Contacts change state if the MCB trips due to a fault |
Mounts on the right hand side |
Description Reference |
Lockable with padlock DEASS
(Padlock not supplied)
|
